rOjqYJaNrm5VphIubPIKJDGmS02MVPT8F6jVUjM6

How to flash Stock ROM using LiveSuit Application

Bang2sutara.com-These are the instructions to Flash or Install Stock ROM (firmware) on devices powered past AllWinner Chipset using the LiveSuit Application.

Requirements: Your AllWinner Device should accept at to the lowest degree xx-30 pct of battery to perform the Flashing Process.

Flash or install .img Stock ROM (firmware) using LiveSuit Application

  1. Download in addition to install Android ADB Drivers on the computer (if inward example ADB Drivers are already installed on the computer, so SKIP this step).

  2. Download and extract LiveSuit Application on the calculator. After Extracting, y'all will be able to meet the next files:

  3. Now, Open LiveSuit.exe from the extracted files:

  4. Once LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard.

  5. Now, You accept to Select the Upgrade Mode which is General and Mandatory. Click on Mandatory to proceed.

  • Now, Unplug all the connected Smartphone and tablets from the figurer (if y'all have already connected), and then Click on Next push to Continue.

  • Now, You accept to pick out the .img firmware. If y'all are fix Click on Yes Button too locate the .img Firmware on your computer.

  • Now, Dont Click on Finish Button.

  • Now, It is the right time to connect your Mobile Device to the Computer using the USB Cable (make certain its Power Off).
  • Firstly, Connect the USB cable to the figurer, so Press as well as Hold the Volume Down Key on your Mobile Device together with Connect the USB cable. While belongings the Volume Down Key directly Press Power Key for 10 times, and then that the figurer can recognize your device.

  • Once your computer successfully recognizes your Mobile Device, you lot will live able to meet the following Window saying to Mandatory Format the Device. Click on Yes to Continue.

  • On the next Windows, once again Click on Yes Button to proceed.

  • Now, LiveSuite volition offset the flashing process (flashing or installation procedure may take iv-half dozen minutes to complete).

  • Once Flashing is completed successfully and then y'all volition be able to come across Upgrade Succeeds Window. Click on OK to Close it.

  • Now, shut LiveSuit Application past clicking on the Exit Button.

  • Disconnect your Device from the Computer as well as Restart it.
  • Congratulations, You have successfully flashed the stock ROM (firmware) using LiveSuit Application.

    Readme Once:

    [*] Device Not Found Error: If you lot are facing Device Not Found mistake, and so it means your device is not correctly connected to the reckoner, re-insert the USB cable to the estimator or endeavour amongst some other USB cable.

    [*] Caution: Take a completed backup of your device earlier using the LiveSuit Application because, during the flashing procedure, your information will live removed.

    [*] Alternative Tool: Phoenixsuit, Phoenix USB Pro as well as PhoenixCard are the best alternatives, which also allows y'all to Flash the Allwinner IMG firmware on the Allwinner Devices.

    [*] Credits: Live Suit is created in addition to distributed past Allwinner Technology Co. LTD. So, full credit goes to them for sharing the tool for complimentary.

    SHARE

    Recommended Post

    Subscribe to get free updates