How to flash Stock Rom using SP Flash Tool are the instructions to flash or install Stock ROM (firmware) on Mediatek Devices using the SP Flash Tool (SmartPhone Flash Tool).

Caution: Flashing or installing Stock ROM (firmware) using the SP Flash Tool, will wipe the data. Therefore, we recommend yous to accept a backup of your data earlier using the tool.

Install or Flash Scatter Firmware using SP Flash Tool

  1. Download together with install Mediatek Driver Autoinstaller on your reckoner (if in case Mediatek Driver is already installed on the computer, and then SKIP this footstep).

  2. Download the Stock ROM (firmware) of your Mediatek Device in addition to extract it on the computer (y'all tin can observe Stock ROM on FirmwareFile or through Google).

  3. Download together with Extract SP Flash Tool on the Computer. Once the Tool is extracted, yous will live able to come across the next files:

  • Now, Open flash_tool.exe to launch the tool.

  • Once SP Flash Tool is launched, Click on the Scatter-Loading Button.

  • Now, Locate the Scatter File (y'all can discover the scatter file inward the Stock ROM of your device).

  • Now, Untick the Preloader selection (flashing the preloader.bin tin can brick the device).

  • Click on the Download Button to Begin the Flashing Process.

  • Connect your Mediatek Device to the Computer using the USB Cable (brand sure it is power off). After connecting the device to the estimator Press Volume Down or Volume Up central, then that SmartPhone Flash Tool tin can notice the device.

  • Once the Computer detects your Device, the Flashing process will Start Automatically.

  • Once Flashing Process is completed, a Green Ring will look at the End.

  • Now, Close the Flash Tool on the calculator together with Disconnect the Device.
  • Congratulations! You Just learned to flash or install Stock Firmware on Mediatek Devices.

    Readme Once:

    [*] Caution: We make not recommend y'all to flash the preloader.bin file using the Flash Tool equally it may brick the device. Therefore, always untick the preloader.bin pick earlier starting the flashing procedure.

    [*] Mediatek USB Driver: If y'all are looking for the master copy Mediatek USB Driver, then head over to the MTK Driver page.

    [*] How to Flash IMEI: If y'all desire to Write or Change IMEI of any Mediatek Devices, so head over to How to use SN Write Tool page.

    [*] Credits: SP Flash Tool is created too distributed by Mediatek, Inc. So total credit goes to them for sharing the tool for complimentary.